ITW Shippers Void Fillers

ITW Shippers offers a complete line of void fillers for all your load securement needs.

Honeycomb Void Fillers-
The unique honeycomb void filler design expands downward when hung between any product that is shipped on pallets or slip sheets. Once positioned in place it fills crosswise voids in full or partially loaded trailers, railcars or containers.

Installation only takes seconds. A single worker simply guides an unexpanded void filler into a void. Its corrugated hanger rests on the top of the unit loads on either side of the void. The filler falls freely, providing thorough product surface coverage.

Fill-M3 Void Fillers-
Designed for use with shrink wrapped, stretch wrapped, spot glued and unitized loads. Only ITW Shippers Fill-M3 reusable void fillers are truly hassle free.

Because it has smooth sides and is rigid when installed, it practically falls into place. If you get a tight fit, you can press against the Fill-M3 and force it into the void much easier.

Fill-M3 is completely reusable. The inside core, which gives the void filler its ultimate strength, is never exposed, so it can't be harmed.

Space-Brace Bulkheads-
With its unique design and durable construction, Space-Brace has proven to withstand forces in excess of 50,000 lbs. in test after test. Space-Brace eliminates the need for singles (one pallet row) and allows center loading for equalized distribution of weight.

Flex Fillers-
Flex filler is a uniquely designed adaptation of void filler. A corrugated facing spans one entire side of the honeycomb cells. Once expanded and in a void, the corrugated facing will upright the flex filler .

In an unexpanded condition, flex filler is compact and stores flat. A large quantity of flex filler can be stored in a small space, freeing up storage ares for product.